¶ Ventilation
¶ Overview
Input Voltage: DC 6-55V
Maximum current: 30A
¶ Aliexpress
¶ Setup
¶ Remote control code matching:
Long press the setting button, then power on, and then press any key on the remote control once. The backlight flashes twice and the code matching is successful.
¶ Factory settings:
Enter the settings, press and hold the settings button for 6 seconds, and the backlight flashes twice to successfully restore the factory settings.
¶ Introduction to 11 Features:
¶ Function 1:
Soft start time setting: 000-100 (0-10 seconds)
Soft start time adjustable, default to 1 second.
¶ Function 2:
Soft stop time setting: 000-100 (0-10 seconds)
Soft stop time adjustable, default to 1 second.
¶ Function 3, Funktion 4, Funktion 5:
If there are more than 999 bits in the setting interface, they will not be displayed, and thousands of bits will flash.
¶ Function 3:
Maximum speed scale setting: 000-9990 (0-9990) Default 100
¶ Function 4:
Speed lower limit setting: 000-9980 (0-9980) adjustable, default 0
¶ Function 5:
Speed upper limit setting: 000-9980 (0-9980) adjustable, default 100
¶ Function 6:
Speed increase/decrease value setting: 001 002 005 010 015 020 025 050 100 Each press of the increase/decrease button changes the corresponding speed value
|:--------
:----:----:----:----
|Function 7|Mode 1|mode 2|Mode 1|mode 2|
|Function 8|Mode 1|Mode 1|mode 2|mode 2|
|working condition|Power on without self starting|Power on automatic start|Jog start release stop|Jog stop release operation|
¶ Funktion 9:
Running time setting 00:00:00 ~ 99:59:59 can be set. When all are 0, it means there is no timing, and the default is 0; (Delay time is not included)
¶ Funktion 0:
Stop time setting 00:00:00 ~ 99:59:59 can be set. When all are 0, it means there is no timing, and the default is 0; (Slow stop time is not included)
¶ Funktion A:
Start stop cycle number setting: 0 ~ 999 adjustable, 0 is infinite cycle, default is 0 times.
¶ Switching on
Starts automatically when switched on and then runs for 30 minutes.
Remote control is located near the light switch of the Hobelhöhle.
¶ Shortcuts
- Hobelhöhle
- Circular saw For ripping timber in fibre direction and panel materials
- Miter saw cuts timber and boards to length with angles of 90-45°
- Band saw for curved cuts or rough cutting of timber
- Thicknessing planer Makes timber thinner
- Drill press Makes holes in pretty much everything
- Lathe This is our lathe. There are many others like it, but this one is ours.
- CNC Does what the computer says
- Tormek Wet grinding machine for tool sharpening
short URL: https://t1p.de/krwlx